Quick Details
LED screen
Environmental-friendly shell
Timer function
Timer shutdown function
Ultrasonic oxygen concentration senso
oncentration
Fault detection function
sleep mode, less light.
Overheat-prevent protection function
Atomization function
Packaging & Delivery
| Packaging detail:Standard export package Delivery detail:within 7-10 workdays after receipt of payment |
Specifications
Oxygen Concentrator AMZY60 for sale|Medsinglong
Product teatures
LED screen
Environmental-friendly shell .
Timer function,total working time on the display。
Timer shutdown function
Ultrasonic oxygen concentration sensor, real-time monitoring of oxygen concentration
Fault detection function (including transformer cycle fault detection,
compressor fault detection, heat dissipation fan failure detection, low
oxygen concentration detection )
sleep mode, less light.
Overheat-prevent protection function
Atomization function ( Only for AMZY60 )
Packing list
Main body ( include Humidified water tank )
X1
Atomization components ( AMZY60
X1
Remote control
X1
eInstruction manual ( warranty card, certificate of conformity )
X1
Power plug
X1
The atomization components (optional accessories) used with this
product are all medical devices that have been approved for registration and licensing. Please use the accessories recommended or specified by our company. Disposable atomizer is strictly prohibited to be reused.If the packaging of the atomizer is damaged , don't use it. The waste after use must be properly handled under the guidance of the medical waste disposal regulations.
*When using oxygen concentrator, it is recommended to purchase an
oxygen tube or mask which have medical device product registration
certificate (sold separately)
Please check the appearance of the carton or other packaging when
unpacking, and check all the components. If any packing is damaged ormissing, please contact the dealer or manufacturer in time.
3.Main Specifications
Name:Medical molecular sieve oxygen generator
Method:PSA
Power supply:AC 220V/50HZ
Rated power: 380VA( AMZY60 )
Maximum recommended flow:3L /min
5L/min ( AMZY60 )
Maximum recommended flow rate/Flow rate when 7kPa back pressure is
applied: Flow rate change is less than 10% when 7kPa back pressure is
applied
Oxygen concentration:93% ( deviationt3% )
Oxygen pressure range:30kPa-70kPa
Atomization rate:>0.2mL/min ( Only for AMZY60 )
The median diameter of the mist particles: the median diameter of the atomized mist particles is 3.0 m, and the error should not exceed 25%
Equivalent volume particle size distribution: the proportion of fog particles with a diameter of less than 5 m produced by atomization is greater than 60%
Running noise:<55dB ( A weighting )
<58dB ( A weighting) ( AMZY60 )
Electrical clasification: Type II equipment, type B application part
Operation mode:Continue to operate
Dimensions:380mm x240mm x 627 mm
Net weight:Please see on the outer packaging
Normal working environment:
Ambient temperature5°C一40°C
Relative humidity < 80%RH
Atmospheric pressure86kPa ~ 106kPa
Storage and transportation environment:
Ambient temperature-20°C 60°C
Relative humidity < 93%RH ,No condensation
Atmospheric pressure86kPa ~ 106kPa
When the temperature is lower than 0°c, the device should be place
under normal working conditions for more than four hours before
starting to work.
The oxygen concentration will not be reduced when the altitude is
lower than 2000 meters. But the efficiency will be less than 90% if
the altitude is higher than 2000m.
