Good Quality Mammography X-Ray System - ADM-3000A Dental Cone Beam Computed Tomography System – Amain Detail:
Product Description
New Design ADM-3000A Dental Cone Beam Computed Tomography System (CBCT) Dental CT machine
I. Clinical Application Oral and maxillofacial cone beam computed tomography equipment (dental CT) with 12cmX15cm flat panel
detector, can be widely used in oral and maxillofacial surgery, orthodontics, orthognathic surgery, implant, dental,
temporomandibular joint Preoperative and postoperative.1. Performance Characteristics 1. Using the world’s top high-end flat panel detector, high resolution, small distortion, uniform
brightness. 2. Use exposure mode, only when needed to activate the X source. During the rotation of the 18s, the rays last
only 4-8s. The effect of reducing the check dose, reached the international advanced level. 3. 3000A proprietary
three-dimensional reconstruction algorithm, the original two-dimensional sequence projection into a three-dimensional volume
image, you can at any angle, any location to provide high-definition tomography. 4. through the three-dimensional volume image
extraction of oral panorama, can provide high-definition panoramic images. 5, the image can be used to generate reports, print
or save as a report file. 6, can provide standing, sitting and wheelchair and other kinds of film.
detector, can be widely used in oral and maxillofacial surgery, orthodontics, orthognathic surgery, implant, dental,
temporomandibular joint Preoperative and postoperative.1. Performance Characteristics 1. Using the world’s top high-end flat panel detector, high resolution, small distortion, uniform
brightness. 2. Use exposure mode, only when needed to activate the X source. During the rotation of the 18s, the rays last
only 4-8s. The effect of reducing the check dose, reached the international advanced level. 3. 3000A proprietary
three-dimensional reconstruction algorithm, the original two-dimensional sequence projection into a three-dimensional volume
image, you can at any angle, any location to provide high-definition tomography. 4. through the three-dimensional volume image
extraction of oral panorama, can provide high-definition panoramic images. 5, the image can be used to generate reports, print
or save as a report file. 6, can provide standing, sitting and wheelchair and other kinds of film.
Specification
|
PARAMETER
|
SPECIFICATION
|
|
Technical indicators |
Anode voltage: 60-92 kV
|
|
anode current: 1-15 mA.
|
|
|
Maximum output power: 1.38kw
|
|
|
parameter adjustment range: 60 ~ 92KV 1 ~ 15mA
|
|
|
Information display: KV, MA, lifting position information, human characteristics, laser indication and positioning
|
|
|
X-ray tube
|
X-ray Tube Model: D-054SB (Toshiba)
|
|
Focus: 0.5
|
|
|
Heat capacity: 35kJ (50kHU)
|
|
|
photography mode: cone beam CT
|
|
|
Image system Thales flat panel detector 650HD-E |
image receiving size: 12cmX15cm flat panel detector
|
|
pixel size: 150
|
|
|
A / D conversion depth: 14bit
|
|
|
Acquisition mode: pulse mode
|
|
|
Detector Type: CMOS
|
|
|
Pixel matrix: 960 * 786
|
|
|
Limit resolution up to: two-dimensional ≥ 3.1 lp / mm
|
|
|
Structural Performance |
Column lift stroke: 1000mm
|
|
Lifting noise: <70dB (with buzzer sound)
|
|
|
Collision protection: Yes
|
|
|
Weight: 260kg
|
|
|
Dimensions: 788mm (width) X 1090mm (length) X 2200mm (height)
|
|
|
Power requirements: 220V / 50HZ / 2kVA
|
|
|
Space requirements: the required area of 5 square meters, unilateral 2 meters
|
|
|
The camera room should have a protective thickness of 2 mm lead
|
|
|
Electrical control device size: width 340mm, depth 550mm, height 650mm
|
Product detail pictures:
Related Product Guide:
The key to our success is "Good Product Quality, Reasonable Value and Efficient Service" for Good Quality Mammography X-Ray System - ADM-3000A Dental Cone Beam Computed Tomography System – Amain, The product will supply to all over the world, such as: Malaysia , Colombia , Chicago , We sincerely hope to cooperate with customers all over the world, if you would like to have more information, please kindly contact us, we are looking forward to building up a great business relationship with you.
By Cora
from Victoria
- 2018.02.12 14:52
The sales manager is very patient, we communicated about three days before we decided to cooperate, finally, we are very satisfied with this cooperation!
By Princess
from Portland
- 2017.04.28 15:45
Leave Your Message:
Write your message here and send it to us.
