I-Amain AMEF008 manual cutting automatic heat sealer

Amain AMEF008 manual cutting automatic heat sealer Isithombe Esifakiwe

Incazelo emfushane:

Thumela i-imeyili kithi

Imininingwane Yomkhiqizo

Omaka bomkhiqizo

Incazelo Yomkhiqizo

I-Amain OEM/ODM AMEF008 iyaqhubeka nokusika isivalo sokushisa esizenzakalelayo se-Medical mask sealer

Ukucaciswa

into	inani
Uhlobo	Umshini wokuvala
Izimboni Ezisebenzayo	Isibhedlela, Umkhiqizi Wemaski, Imboni yokuhlinzeka ngezokwelapha njll.
Ububanzi bokuvalwa (imodeli iyakhethwa)	300mm, 400mm
Isimo	Okusha
Isicelo	Ezokwelapha
Ibanga elizenzakalelayo	I-Manul /Semi-automatic
Uhlobo Oluqhutshwayo	Ugesi
Amandla e-AC	220V±10% 50Hz
Ubuningi bamanje	3.2 A
I-Fuse	5A×2
Izinga Lokushisa Lokusebenza	60℃ 220℃ adjustable
Iphutha lokushisa	Ngaphansi kokuthi (+2%~-2%)
Amandla aphezulu	500w
Le yindawo ka Origin	China
I gama le-brand	Amain
Ubukhulu(LWH)	370320120mm
Isisindo	10KG
Iwaranti	1 Unyaka
Amaphuzu Okuthengisa Abalulekile	Kulula Ukusebenza
Uhlobo Lokumaketha	Umkhiqizo Oshisayo wango-2020
Umbiko Wokuhlolwa Kwemishini	Kuhlinzekiwe
Ukuhlola okuphumayo kwevidiyo	Kuhlinzekiwe
Iwaranti yezingxenye eziyinhloko	1 Unyaka
Indawo yokusetshenziswa kwesitoreji	Izinga lokushisa: 10℃ 40 ℃; Ukuswakama: ≤90% (RH); Ingcindezi ye-atmospheric: 50KPa～106KPa
Igama lomkhiqizo	Ukusika Umshini Wokushisisa Othomathikhi ozenzakalelayo
Isevisi yangemuva kokuthengisa Inikeziwe	Ukusekela ku-inthanethi
Umsebenzi	Isikhwama sezokwelapha sokungeniswa Ukuvala uphawu
Igama elingukhiye	umshini wokuvala uphawu wezokwelapha
Ifanele	Ukupakishwa okuvalekile kwezinsiza zokwelapha ngaphambi kokukhishwa kwamagciwane
Ukusetshenziswa	izinto zokwelapha

Isicelo

Umshini wokuvala uphawu we-AMEF008 uyithuluzi elikhethekile lokwelashwa kokuvala ukushisa njenge-sterilization roll, izikhwama zamaphepha kanye ne-Tyvek Sterilization roll.Ukusika ngesandla kanye nokuvala uphawu okuzenzakalelayo kungenziwa kuma-rolls ahlangabezana nezidingo.Ilungele ukuvalwa kwazo zonke izinhlobo zezihloko zezokwelapha, amayunithi okukhiqiza okudlekayo kwezokwelapha noma imikhiqizo yemithi ngaphambi kokuvala inzalo.Ingahlangabezana nezidingo zokuvala inzalo yesitimu esishisayo, izinga lokushisa eliphansi le-ethylene oxide, i-hydrogen peroxide plasma kanye nokuvala inzalo ngemisebe.Kungumkhiqizo othuthukisiwe womshini ojwayelekile wokuvala uphawu.

Impahla etholakalayo ukuze ivalwe	Vala izikhwama ezihlanganisiwe namakhoyili ngokuhambisana ne-EN 868-5 kanye ne-YY/T 0698-5
		Ukuminyana okuphezului-polyethylene impahla (isb. iTyvek)
		Ingxube ye-aluminium foil

Izinto ezingavaliwe	Ifilimu ye-polyethylene
		I-pvc eqinile ye-pvc
		Ifilimu enayiloni, ifilimu ye-polypropylene.

Izici Zomkhiqizo

Imodeli	spec	Ukuvala Ubude(mm)	ububanzi bokuvalwa (mm)	usayizi(mm)	amandla(w)	isisindo(kg)
I-AMEF008	A	300	10	370320120	500	10
		B	400	10	470320120	700	11
		C	500	10	570320120	800	13

Umkhiqizo unomsebenzi wawo wokusika isikhwama se-roll, wamukela isilawuli se-chip eyodwa, isibonisi seshubhu yedijithali, isifudumezi sempilo ende, izinga lokushisa elishintshwayo, ukuvikela okuzenzakalelayo kwe-ultra-high kanye neminye imiklamo eyingqayizivele.

Inezinzuzo zokusheshisa izinga lokushisa, ukulawula izinga lokushisa okunembile, ukusebenza okuzinzile, ukubukeka okuhle, ukusetshenziswa okuphephile, ukusebenza okulula nokusebenza okuzinzile.Phakathi naleso sikhathi, umshini usetshenziselwa ukushisa kwangaphambili kanye nokusetshenziswa okuqhubekayo ukuze kugwenywe ukulimala kwe-heater okubangelwa ukuvalwa njalo nokunciphisa isikhathi sokulinda sokuvala.Kuyidivaysi yokuvala izinhloso ezimbili ebukeka kahle, isakhiwo esihlangene kanye nesisindo esincane.1.Umshini wokufaka uphawu owenziwe ngesandla uklanywe ngomsebenzi wokuvikela ummese ukuze uvikele umsiki emonakalweni wengozi kuyilapho uqinisekisa ukuphepha komqhubi ngokuphumelelayo;

2.Umshini wokuvala ukushisa okuzenzakalelayo uklanywe ngomsebenzi wokuvala ukushisa okuzenzakalelayo, okukwazi ukubona ukunyakaza okuzenzakalelayo kuya phezulu naphansi kwe-compression crossbeam ngokusebenzisa inkinobho yonyawo noma inkinobho yokuvala ukushisa okwenziwa ngesandla, kanye nezinga lokushisa nesikhathi sokuvala kungaba kulawulwa uhlelo olulodwa lokulawula i-microcomputer ngesikhathi esifanayo.Qedela ukuvala isikhwama esishisayo;

3. Yamukela ibhodi edidiyelwe yokulawula isibonisi, enemigqa emibili yesibonisi se-LED esinemibala emibili ekhanyayo ephezulu, inkinobho yokuthinta ukukhanya, umsebenzi wokusetha izinga lokushisa, izinga lokushisa lokusebenza lokubonisa idijithali, elilungele abasebenzisi;

4. Idizayini yokulawula izinga lokushisa ehlakaniphile ye-Microcomputer, izinga lokushisa elisebenzayo elingu-60 ~ 220 °C libekwe ngokungafanele, ukunemba kokulawula izinga lokushisa kungaphansi kuka-± 2% °C;

5.Ukuphepha: Uma izinga lokushisa lokuvala lidlula izinga lokushisa elibekiwe lezinga lokushisa elisebenzayo elingu-±10 °C, umshini uzoyeka ukusebenza ngokuzenzakalelayo, uqinisekisa ikhwalithi yokuvala nokuphepha kwezinto zokusebenza ngempumelelo;

6.Ububanzi bokufaka i-embossing bungu-10 mm, futhi inkomba yekhwalithi yokuvala ihlangabezana nezimfuneko ze-Hospital Disinfection Supply Hospital Regulations Prevention and Control Regulations kanye ne-YY/T ejwayelekile 0698.5-2009;

7. Ngomsebenzi wokunxeshezelwa kwezinga lokushisa, izinga lokushisa lokuvala lingalungiswa phakathi kwebanga -20 °C ~ 0 ~ 20 °C njengoba kudingeka;